Safety poster

 How to use the tools safely

in order to keep the try square accurate, care should be taken not to drop it. All the angles of the square, exterior as well as interior, must be perfect right angles. Always keep the try square at right angles to the surface.Used for woodwork, 

How to use a g clamp safely 

especially for holding edges when gluing.

Apply clamping pressure at right angles to the glue line otherwise slippage may result.

Used for carpentry, welding, or cutting.Can be made of metal or wood.

Used to hold small pieces or in furniture repair.Wear safety glasses or goggles, or a face shield (with safety glasses or goggles).

Select the proper clamp style and size by matching the work-holding requirements of the job with the following clamp features:

strength and weight (e.g., consider rail size and nominal clamping pressure)

opening (length of reach)

throat depth (depth of reach)

ease of adjustment

clamping surfaces (material used and size)

Ensure that the swivel at the end of the screw turns freely before using.

Dispose of clamps with bent frames; replace bent spindles, if possible

how to use coping saw

To safely use the coping saw, firmly hold the material in a vise or with clamps. Place the saw's central teeth on the line to be cut and push the saw in a short stroke to start the cut. Continue the cut, turning the handle and frame as needed to follow the cut line.

how to use an hand saw

Wear a Safety Mask and Goggles Use a Tool of the Right Size 3. Inspect Hand Saw before Every Use 4. Check Material for Knots or Nails 5 - Never Test Sharpness with Hands 6 - Start Slowly 7. Ensure that the Material is Kept Firmly in Place 8. Keep the Hand Saw Clean 9. Store in a Safe Place 10. Use Full Length Strokes Directed Away from Your Body

How to behave with tools

don't run around with them don't point while having something sharp in your hand.

accidents that could happen.

if you run and your pointing your tool upwards you could trip and accidentally stab yourself you could get really injured.

don't do what homer Simpson does while trying to nail something into the wall.when trying to point o where something is put your tool down so that you don't poke someone's eye out.